Axagon PCIE NVME+SATA M.2 ADAPTER
Den interne AXAGON PCEM2-D-adapter gør det muligt at tilslutte så mange som to M.2 SSD til en stationær computer. Så det er et ideelt valg til opgradering af en stationær computer, der ikke har noget M.2-slot. Adapteren understøtter brugen af både ensidede og dobbeltsidede SATA- og NVMe (PCI-Express) M.2 SSD'er. Reduktionen begrænser ikke SSD-kapaciteten, og alle M.2-kort med en længde på op til 110 mm kan bruges. Samtidig drift af begge diske er almindeligt.
-
Product no 997112379
Model PCEM2-D
Brand AXAGON
EAN 8595247903846
Weight 0.13 kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Produktbeskrivelse | AXAGON PCEM2-D - lagringskontrol - M.2 NVMe Card / SATA 6Gb/s - PCIe 3.0 x4 |
| Enhedstype | Lagringskontrol - indstikskort - lavprofil |
| Bustype | PCIe 3.0 x4 |
| Harddiskens formfaktorkompatibilitet | M.2 |
| Interface | M.2 NVMe Card / SATA 6Gb/s |
| Dataoverførselshastighed | 8 GBps |
| Understøttede enheder | Solid state drev |
| Antal kanaler | 2 |
| Maks. antal lagerenheder | 2 |
| Systemkrav | Linux Kernel 2.6.31 eller nyere, Microsoft Windows Server 2008 R2 (32/64-bit), Microsoft Windows Server 2012 (32/64-bit), Microsoft Windows 7 / 8 / 8.1 / 10 (32/64 bits), Microsoft Windows Server 2016 (32/64 bits) |
| Dimensioner (B x D x H) | 14.2 cm x 6.8 cm x 0.8 cm |
| Vægt | 46 g |
| General | |
|---|---|
| Device Type | Storage controller - plug-in card - low profile |
| Hard Drive Form Factor Compatibility | M.2 |
| Host Bus | PCIe 3.0 x4 |
| Storage Controller | |
| Channel Qty | 2 |
| Data Transfer Rate | 8 GBps |
| Interface | M.2 NVMe Card / SATA 6Gb/s |
| Max Storage Devices Qty | 2 |
| Supported Devices | Solid state drive |
| Expansion / Connectivity | |
| Interfaces | 1 x M.2 Card - M.2 B Key (internal) | 1 x M.2 Card - M.2 M key (internal) |
| Miscellaneous | |
| Cables Included | 1 x Serial ATA cable - external - 50 cm |
| Compliant Standards | Plug and Play |
| Features | TRIM support, bootable |
| Included Accessories | Low-profile bracket, screwdriver, mounting hardware |
| Software / System Requirements | |
| OS Required | Linux Kernel 2.6.31 or later, Microsoft Windows Server 2008 R2 (32/64-bits), Microsoft Windows Server 2012 (32/64-bits), Microsoft Windows 7 / 8 / 8.1 / 10 (32/64 bits), Microsoft Windows Server 2016 (32/64 bits) |
| Dimensions & Weight | |
| Depth | 6.8 cm |
| Height | 0.8 cm |
| Weight | 46 g |
| Width | 14.2 cm |
| Dimensions & Weight (Shipping) | |
| Shipping Depth | 17 cm |
| Shipping Height | 3.2 cm |
| Shipping Weight | 119 g |
| Shipping Width | 13.6 cm |
The internal AXAGON PCEM2-D adapter allows to connect as many as two M.2 SSD to a desktop. So, it is an ideal choice for upgrading a desktop computer that has no M.2 slot.
The adapter supports the use of both one-sided and double-sided SATA and NVMe (PCI-Express) M.2 SSDs. The reduction does not limit SSD capacity, and any M.2 cards with a length up to 110 mm can be used. The simultaneous operation of both disks is commonplace.
Thanks to PCI-Express interface compatible with x4, x8 and x16 slots, a maximum transmission rates can be achieved. When compared to standard SATA SSDs, bit rates of NVMe SSDs are many times higher.
The high quality card design, including copper-plated vents, assists in a better dissipation of heat generated during the M.2 SSDs operation.
Double LEDs indicate either power on or data transfer in the M.2 slot.
The package also contains a low profile bracket for mounting the adapter into low profile cases.
Input:
• PCI-Express interface compatible version PCI-Express: 4.0 / 3.0 / 2.1 / 2.0 / 1.1 / 1.0a.
• Number of 4-Lane lines, compatible with x4 / x8 / x16 PCIe slots.
• SATA connector to connect the motherboard when a SATA M.2 SSD is used. To achieve the best possible bit rates, the use of a SATA 6G controller is recommended.
Output:
• NGFF 75-pin M-key slot to install the NVMe (PCI-Express) M.2 SSDs.
• NGFF 75-pin B-key slot to install the SATA (AHCI) M.2 SSDs
Other features:
• Full Plug and Play support.
• Support of M.2 disks of any size - 2230, 2242, 2260, 2280, 22110 mm.
• Support of M.2 disks of any capacity.
• Simultaneous operation of both disks.
• Support of both one-sided and double-sided M.2 disks.
• A better dissipation of heat from M.2 SSDs thanks to copper-plated vents.
• Support of booting from SSD cards.
• Dimensions 142 x 64 x 12 mm.
• Weight 46 g.
• No drivers need to be installed.
• Note: CAUTION! The adapter allows to insert B+M-key disks in both M.2 slots. It is important to check the disk parameters, i.e. to make sure whether the disk is designed for SATA or NVMe (PCI Express) interface, and to connect it to the right slot. SATA drives are pluged into the B-key slot, NVMe drives are pluged into the M-key slot.
Power supply:
• The adapter is directly supplied from PCI-Express bus; no external power supply is needed.
• The system of dual power supply ensures a sufficient power for connected M.2 SSDs.
• In addition, the system of redundant power supply reduces the adapter thermal load.
Supported operating systems:
• MS Windows 7 / 8 / 8.1 / 10 /11, Windows Server 2008 R2 / 2012 / 2016 (all 32-bit as well as 64-bit versions of OS Windows are supported), Linux with kernel 2.6.31 and higher.
• Note: When operating under Windows 7, contact the manufacturer of the M.2 SSD to find whether this OS is supported, especially when NVMe disks are used.
Package contains:
• PCI-Express adapter with a standard bracket,
• low profile bracket,
• 2 pcs. thermally conductive pads,
• SATA data cable 50 cm long,
• mounting material and a screwdriver,
• printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA,
• packed in a cardboard box.